Mouse Test: Check Clicks, Double-Clicks and Scroll Wheel

Click inside the box with each mouse button and scroll the wheel. Every button lights up when it works, and the test warns you if your mouse sends a double click when you only clicked once, the most common fault in worn mice.

Click and scroll inside this box

Click and scroll inside this box

Left0
Middle (wheel)0
Right0
Back0
Forward0
Wheel up0
Wheel down0
Unwanted double clicks
0
Fastest repeat click
—
Report rate (approx.)
—
Last event
—

Private: clicks and movements are only used to update this page. Nothing is saved or sent anywhere.

By EasyDeviceTest · Last updated:

How to test your mouse

  1. Click inside the test area. Press the left, right and middle buttons one at a time inside the box. Each one lights up while pressed and turns green once tested.
  2. Try the side buttons. Press the back and forward buttons on the side of the mouse inside the box. The page blocks their usual “go back” action while you test.
  3. Scroll the wheel. Scroll up and down slowly. Each step adds to the counter. If it jumps in the wrong direction, the wheel may be dirty or worn.
  4. Check for double clicks. Click the left button once at a time, at a normal pace, about 20 times. If the “Unwanted double clicks” counter goes up, your mouse is sending two clicks for one press.

What the results mean

ResultWhat it means
All buttons turn greenEvery button registers. Your mouse works.
A button never lights upThe switch isn’t making contact, or the mouse software has assigned that button to another action (gaming mouse apps, Logitech Options+, Razer Synapse…). Check the app before blaming the hardware.
“Unwanted double clicks” goes upSwitch chatter: a worn switch bounces and sends two clicks for one press. Typical symptoms are files opening when you only wanted to select them, or drag and drop letting go halfway.
The wheel counts the wrong way or skipsThe scroll wheel sensor is dirty or worn.
Side buttons don’t registerSome mice only send them when the manufacturer’s app is running, especially on a Mac.

About the report rate

The report rate (or polling rate) is how many times per second the mouse tells the computer where it is. Office mice usually report 125 times per second (125 Hz) and gaming mice 500–1000 Hz or more. Move the mouse quickly in circles inside the box for two or three seconds for the most stable reading. Browsers group movement events, so treat the number as an estimate. Safari doesn’t share this information, so the value stays empty there.

How to fix a mouse that double-clicks

  • Check the system settings first. On Windows, open Settings › Bluetooth & devices › Mouse › Additional mouse settings. On the Buttons tab, set a normal double-click speed and make sure ClickLock is off. On a Mac, open System Settings › Accessibility › Pointer Control.
  • Raise the debounce time. Many gaming mice let you change the “debounce time” in their app. A slightly higher value filters out the extra click.
  • Clean the button. With the mouse off, blow compressed air into the gap around the button and click it firmly 20–30 times.
  • Check the warranty. Chatter is a known wear fault of mechanical switches, and mice are often still covered. Replacing the switch requires soldering. Mice with optical switches don’t suffer from it.

Mouse not working at all? Quick checks

  • Wireless mouse: change the batteries or charge it, and plug the receiver straight into the computer, not into a hub. USB 3 ports and cables can interfere with the receiver, so use a port on the other side or a short extension cable.
  • Bluetooth mouse: turn it off and on, or remove it from the Bluetooth list and pair it again.
  • Surface: optical sensors struggle on glass and glossy tables. Use a mouse pad or a sheet of paper.
  • Windows: in Device Manager › Mice and other pointing devices, uninstall the mouse and restart. Windows installs it again.
  • Try another computer: if it fails there too, the mouse is faulty.

Testing a keyboard as well? Use the keyboard tester.

Clicks and movements are only used to light up the drawing on this page. Nothing is saved or sent anywhere.

Frequently asked questions

How do I know if my mouse is double-clicking by itself?

Click the left button once at a time, at a normal pace, about 20 times inside the box. If the “Unwanted double clicks” counter goes up even though you never double-clicked on purpose, the switch is chattering.

Why doesn’t the back button take me back on this page?

Inside the test box the page blocks the usual actions of the side buttons, the middle button and the right-click menu, so you can test them without leaving the page. Outside the box they work as normal.

Can I test a laptop touchpad?

Yes. A tap or click counts as a left click, a two-finger tap or click as a right click, and two-finger scrolling as the wheel. Most touchpads have no middle or side buttons.

What is a good polling rate?

125 Hz is fine for office work. Gaming mice use 500–1000 Hz or more for smoother tracking. Higher rates use a little more battery and processor time.

Does it work with a Magic Mouse or on a Mac?

Yes. To right-click with a Magic Mouse, turn on Secondary click in System Settings › Mouse.

More free device tests